Below the recommendations for the use of diamond saw blades for your reference:
1. Please do not make any side load or twist on the blade.
请勿倾斜或扭曲锯片。
2. The spindle speed should be suitable for the blade diameter.
轴转速须在锯片直径相应的转速内。
3. Please make sure that the blade is suitable for the material to be cut.
确保锯片适用于所切割材料。
4. The blades should always be installed according to the rotation arrow of the steel centrer pointing direction.
按照锯片上的箭头方向安装锯片。
5. Make sure that the bore diameter of the blade is of the same size as the machine spindle, never enlarge the bore. Any problem please contact your supplier.
确保锯片的轴孔与机器的轴孔一致，请勿自行扩孔，有任何问题请联系供应商。
6. Make sure that the blade flanges are clean and same bore diameter.
请特别留意并确保锯片的法兰干净整洁，并大小与锯片契合。
7. The blade must always be used with abundant water supply for cooling.
使用锯片时须保证充足的冷却水。
8. Check regularly the water supply device to make sure the water distribution.
请时常检查供水设备以确保供水稳定。
9. To make sure long blade life, do not brutal or sharp contact with the material to be cut.
为确保锯片使用寿命，请勿用锯片直接切割材料的尖锐角度。
10. Avoid excessive cutting pressure which could jam the blade in the cutting.
请勿施加过度的切割压力，以免切割受阻。
11. When cutting speed decrease, reduce the feed effort or depth of the cutting, allowing the exposure of diamonds.
切速降低时，请降低进给力度和切割深度，以便金刚石更好地露出。
12. Check RPM regularly.
请不时留意机器的转速。
13. Observe the working safety regulations.Make sure that the blade guard is always correctly fitted and used.
请遵守工作安全规章，并确保安全防护配戴。
https://www.toolwits.com/diamond-cutting-tools/diamond-saw-blade-for-granite.html
