Home > Knowledge > Content

Construction types of wire saw

Mar 18, 2022

wire saw


Generally, wire ropes are classified according to their uses. The structure types and manufacturing methods of wire ropes for different uses are also different.Wire rope can be divided into spring wire rope, plastic wire rope, rubber wire rope.Spring type wire rope with spring and washer fixing method, generally using electroplating bead., also can use hot pressing sintering beads.With springs and isolation washers as the spacers between the beads to form a bead cutting unit. The fixing ring fixes every 3-5 cutting units into a set of fixing units.According to the different lengths used, after selecting several groups of fixed units, assemble them into a spring-type wire rope of the required length.The point of grouping is to prevent the beads and other parts of the entire wire rope from falling off once the wire rope is pulled off. At the same time, the beads are separated and maintained in several cutting unit groups, and the beads are reasonably aggregated in each group, which prevents the beads and other parts from gathering together under the action of cutting resistance.The spring type wire rope adopts an open structure, the springs between the beads are pre-loaded before assembly, and the beads, isolation washers and springs in each fixed unit group always reciprocate on the wire rope during the cutting process. During the cutting process, the beads rotate with the rotation of the wire rope, while maintaining the relative rotation between the two, so that the beads can be uniformly worn in all directions on the circumferential surface, ensuring that the beads reach the maximum service life.Therefore, the spring type wire rope does not need to pre-rotate and load the wire rope when it is connected into a closed loop, and the connection method is simpler. However, during the cutting process, the debris of the cut stone will enter the gap between the beads and the wire rope, which will have an abrasive effect on the beads and the wire rope. If cutting marble and limestone, these chips can be ignored for wire rope.


Send Inquiry
Contact Us
    •  Tel: +86-595-22030606

    •  Fax: +86-595-28681577

    •  Mobile/WhatsApp: +8613626067625

    •  QQ: 399611083

    •  Wechat: TOOLWITS

    •  E-mail: jay@toolwits.com

    •  Factory: Xipu Industrial Zone, Heshi Town, Luojiang District, Quanzhou City, Fujian Province, China 362022

    •  Office: Room 811, Fuxin Wealth Center, NO.55 Chenzhou Road, Fengze District, Quanzhou City, Fujian Province, China

    • facebook twitter linkedin instagramyoutubepinterest