Diamond wire saw cutting machine can be used to cut inclined surfaces. The cutting of the so-called inclined surface has two meanings. One is that the horizontal base plane of the cutting surface and the diamond wire saw machine installation operation is not vertical orthogonal, but presents an inclined state, the second means that the installation base surface of the diamond wire saw machine is not horizontal, and it is not perpendicular to the cut surface. Under normal circumstances, diamond wire saw machine can be installed on inclined ground where the angle of inclination with the horizontal plane is less than 10°, it is best not to exceed this angle. Different production manufacturers produce different diamond wire saw machines have specific requirements in the incline plane cutting . When the cutting surface is inclined to the operating base surface of the diamond wire saw machine, the main flywheel rotating surface can be adjusted to coincide with the cutting surface, and the inclined surface can be cut. When cutting the inclined surface, should pay attention to the inclination direction of the cutting surface. At different stages of cutting, insert supporting steel wedge into the cutting seam, the effect is the same as adding steel wedge during horizontal cutting. It is to prevent the rock mass above the cutting surface from falling.
1.Wire saw machine parts:
2.Features of the wire saw machine:
1. This machine is suitable for the separation and demolition of various mines such as granite, marble, bluestone and limestone, as well as large bridges and high-rise buildings.
2, self-controlled frequency conversion device technology, fully automatic cutting control, fast cutting speed, safe and easy operation.
3. Equipped with a computer program device to ensure that the travel drive motor maintains a constant tension.
3.Application of Wire Saw Machine:
4.Packing, Storage, Handling and Transportation:
Wire saw machine first is wrapped with plastic film and then packed in polywood case before delivery. It is electronic product, should be stored in a suitable clean and dry place. Storage conditions should preferably be a sheltered environment with limited temperature -15-43 and low humidity levels.
5.After sales service team:
6.Technical Team:
Hot Tags: diamond wire saw cutting machine, China diamond wire saw cutting machine manufacturers, suppliers, factory, Cutting Wire Saw Machine, Rock Wire Saw Machine Price, Permanent Magnet Saw Machine for Stone Cutting, diamond wire rock cutting machine, electric concrete saw cutting machine, Wire Saw Machine Supplier
