How to use and maintain the wire saw machine in daily life will directly affect the overall efficiency and quality of the machine, so we must pay attention to it. The editor has summarized a few points for attention for everyone, hoping to be helpful to everyone.
The wire saw machine must clean up the aluminum scraps on the rolling guide of the sawing machine and the aluminum scraps on the beam before each shift; confirm that the rotating parts are stopped at the specified position of the equipment, and the power must be turned off each time it is cleaned; When cleaning the guide rail, do not scratch the guide rail surface; regularly check whether the lubricating oil in the saw blade spindle meets the lubrication requirements, and refuel it regularly.
In addition, if we have time, we should observe whether the oil of the lubricating and cooling system on the side of the sawing machine frame meets the workload of the day, and if it cannot meet the requirements, we must add oil immediately. In terms of safety, we must strictly observe that it is forbidden to stand within 3 meters of the saw blade during sawing, especially in front of the saw blade, to prevent saw dust and saw blade teeth flying out and hurting people.
