Sandblasting and painting of diamond saw blades.
1. The purpose of sandblasting the diamond saw blade is to remove the dirt left by the melting loss of the welding blade at the welding spot, and at the same time, check whether there is a weld at the welding spot of the diamond segments through the removal of the dirt.
If there is a weld, it should be repaired. First, the welding is heated to the melting state, and then a layer of silver flux is evenly applied to the welding place, and the welding seam is plugged with silver welding sheet to melt, so as to repair the welding seam and improve the welding strength.
2. The purpose of diamond saw blade painting is to prevent the saw blade rust, while making the diamond saw blade more beautiful. Paint types have no color gloss oil, silver, yellow, green, blue, red, black, bronze, iron, etc., according to the use of diamond saw blade classification, different cutting objects of the saw blade to use different types of paint. Based on customers' requirements, there are full spray and half spray two kinds of spray paint, half spray refers to only spray matrix, not spray diamond segments; Full spray refers to the body and the diamond segments are sprayed with paint.
There is a manufacturer in China named TOOLWITS, which has a 14-year experience of producing diamond wire saw machine for quarry and diamond tools, they have a domestic factory and a very professional team, not only can they provide customers with high-quality products but also a full set of mining planing and minning experience. TOOLWITS must be the greatest purchasing target of customers.
www.toolwits.com
