Diamond wire saw machine can be used to cut the inclined plane. The so-called inclined plane cutting has two meanings. First, it means that the cutting surface is not perpendicular to the horizontal base plane of diamond wire saw installation operation, but presents a inclined state. Second, it means that the base of the installation of diamond wire saw is not horizontal, and it is not perpendicular to the cut surface.
Generally, diamond wire saw can be installed on the inclined ground with an incline Angle less than 10° from the horizontal plane, and it is better not to exceed this Angle. Different models of diamond wire saw produced by different manufacturers have specific requirements for cutting on the incline plane. The incline plane can be cut by adjusting the coincidence between the rotating surface of the main flywheel and the cutting surface.
If there is no stable support for the stone below the inclined cutting surface, attention should be paid to cushion some objects. If there is no way to support, attention should be paid to the prohibition of personnel staying and passing under the rock. When the cutting surface is about to be separated, the cutting of the diamond wire saw machine should be terminated in time, and the diamond wire saw should be extracted from the saw seam and separated from the ore body by splitting or vibrating.
