Ceramic saw blade normally is hook type steel core or whole sintered blade with continuous rim or squama type segment. Because ceramic is crisp, and easy to broke, so required highly sharp blades and more stable cutting. Ceramic materials have high hardness, large elastic modulus, and small elastic deformation. The higher the material hardness, the greater the resistance to damage and intrusion, so the corresponding cutting force is greater. When the diamond saw blade is cutting ceramics, because the ceramic cutting edge and the strength of the substrate have a lot to do with it, if the substrate swings during cutting, when the saw blade head goes in and out, it will hit the edge and cause the ceramic edge to explode. Because to improve the sharpness of the saw blade, the saw blade should be as thin as possible.Ceramic has many different kinds, so the formula also should be different. Normally the good material produced product, the performance is better and suitable for mix cutting.
Ceramic Saw Blade with a hook-type steel core.
|
Diameter |
Segment Spec. |
Segment No. |
Bore |
Whole sintered |
Welding |
||
|
L |
W |
H |
|||||
|
300 |
43.7/41.7 |
2.2 |
7 |
21 |
50/60/25.4 |
|
● |
|
350 |
43.7/41.7 |
2.4 |
7 |
25 |
|
● |
|
|
400 |
43.7/41.7 |
2.6 |
7 |
29 |
|
● |
|
Ceramic Saw Blade with continuous rim
|
Diameter |
Segment size |
Bore |
Whole sintered |
|
105 |
1.8*8 |
20/22.23/25.4 |
● |
|
110 |
2.0*10 |
● |
|
|
115 |
2.0*10 |
● |
|
|
125 |
2.0*10 |
● |
|
|
150 |
2.4*10 |
● |
|
|
180 |
2.6*10 |
● |
|
|
200 |
2.6*10 |
● |
|
|
230 |
2.8*10 |
● |
|
|
250 |
2.6*10 |
● |
|
|
300 |
2.8*10 |
|
● |
Ceramic Saw Blade with Squama Type segment
|
Diameter |
Segment size |
Bore |
Whole sintered |
|
105 |
1.2*10 |
20/22.23/25.4 |
● |
|
115 |
1.4*10 |
● |
|
|
125 |
1.4*10 |
● |
|
|
150 |
1.6*10 |
● |
|
|
180 |
1.8*10 |
● |
|
|
230 |
2.0*10 |
● |
|
|
250 |
2.0*10 |
● |
|
|
300 |
2.2*10 |
|
● |
Note
The above specification is only for Reference, other or special specifications can be ordered by a customer.
Ceramic Saw Blade for Precise Tile & Porcelain Cutting
The Ceramic Saw Blade is a high-precision diamond cutting blade engineered for smooth, accurate, and chip-free cutting of ceramic tiles, porcelain tiles, glazed tiles, vitrified tiles, and brittle decorative materials. Manufactured with premium diamond grit and optimized metal bond, this blade delivers excellent sharpness, stable performance, and extended service life for professional tile cutting applications.
ToolWits ceramic diamond saw blades are widely used by tile installers, contractors, stone fabricators, and construction professionals who require clean edges and consistent cutting quality.
Key Features of Ceramic Diamond Saw Blade
High-Quality Diamond Cutting Edge
The blade uses high-purity industrial diamonds evenly distributed along the cutting rim, ensuring fast cutting speed, minimal chipping, and excellent edge finish on ceramic and porcelain materials.
Continuous Rim Design for Chip-Free Cutting
The continuous rim structure provides uninterrupted contact with the tile surface, reducing vibration and preventing cracks or edge breakage - especially important for glazed ceramic and polished porcelain tiles.
Thin Kerf for Precision & Efficiency
A thin cutting edge reduces material resistance, allowing smoother cuts, less waste, and higher cutting efficiency while preserving tile integrity.
Reinforced Steel Core
Precision-balanced steel core improves blade stability, reduces wobbling at high RPM, and enhances operator safety during wet or dry cutting.
Optimized for Wet Cutting
Designed primarily for wet cutting, water cooling helps:
Reduce heat buildup
Minimize dust
Extend blade lifespan
Improve cutting smoothness
(Some models also support light dry cutting for short operations.)
Available Specifications
Blade Diameter: 105 mm – 350 mm (custom sizes available)
Bore Size: 20 mm, 22.23 mm, 25.4 mm, 50/60 mm
Rim Type: Continuous rim / special reinforced rim
Cutting Materials: Ceramic tile, porcelain tile, glazed tile
Cutting Method: Wet cutting (recommended)
Machine Compatibility:
Tile saws
Table saws
Handheld angle grinders
Electric tile cutters
Applications of Ceramic Saw Blade
The ceramic saw blade is ideal for:
Ceramic tile cutting for floors and walls
Porcelain tile cutting for kitchens and bathrooms
Tile trimming and sizing
Straight cuts and plunge cuts
Residential and commercial tile installation projects
It is especially suitable for precision tile work where clean edges and professional finishing are required.
Advantages Compared to Ordinary Cutting Blades
Cleaner edges with less chipping
Faster cutting speed on hard ceramic materials
Longer service life due to wear-resistant bond
Reduced tile breakage and material loss
Improved cutting accuracy and operator control
Why Choose ToolWits Ceramic Saw Blades?
Specialized manufacturer of diamond cutting tools
Strict quality control and consistent performance
Wide selection of sizes and specifications
Custom OEM & ODM services available
Competitive factory pricing and reliable supply
ToolWits ceramic diamond blades are trusted worldwide for durability, precision, and cost-effective cutting performance.
Packing, Storage, Handling and Transportation
Concrete Cutting Saw Blade if small quantity pack in paper box, if large quantity, they are packed in polywood case before delivery.
After-sales service team
Technical Team
Hot Tags: ceramic saw blade, China ceramic saw blade manufacturers, suppliers, factory, Laser Welded Saw Blade, Diamond Disc For Circular Saw, Diamond Saw With Blade, Ceramic Tile Wet Saw Blades, Granite Stone Cutting Blade, Marble Cutting Blade For Circular Saw
