Diamond wire saw, also known as diamond bead saw, is currently the most advanced stone mining equipment. It has been widely used in the stone industry, machinery industry and construction fields. It is mainly used for the mining and processing of stone and the demolition of reinforced concrete buildings. And trimming, processing of brittle and hard materials such as glass.
Process requirements of diamond wire saw
The diamond wire saw machine uses the main motor to drive the saw rope to run along a track similar to the track. The saw rope passes through the drilled hole on the surface to be cut. The main motor drives the entire sawing machine through the reducer to move backwards along the cutting surface at a certain speed. movement. The moving speed of the saw rope must be adjusted in time according to the load condition of the main motor and the required tension of the saw rope. If the moving speed is too fast, the load of the main motor will increase rapidly, or even overload, the tension on the saw rope will also increase. If the moving speed is not adjusted in time, the saw rope will be stretched. If the moving speed is too slow, the tension of the saw rope will decrease sharply, the saw rope will slip on the stone, reducing the cutting efficiency, and the slack saw rope will be twisted, and even the saw rope will be chopped. It is the key to control to improve the cutting efficiency of the sawing machine under ensuring that the main motor load is basically uniform and the sawing rope is properly tensioned. Due to the irregular shape of the mine or rock, the cross-section is naturally large or small, and the moving speed of the sawing machine must be made in time Adjustment.
